# Difference between revisions of "Longest palindromic substring"

(zolpidem online, ambien cr buy online,) |
m (Reverted edits by 46.39.231.84 (talk) to last revision by 83.244.190.8) |
||

Line 3: | Line 3: | ||

The '''longest palindromic substring''' problem is exactly as it sounds: the problem of finding a maximal-length [[substring]] of a given string that is also a palindrome. For example, the longest palindromic substring of '''bananas''' is '''anana'''. The longest palindromic substring is not guaranteed to be unique; for example, in the string '''abracadabra''', there is no palindromic substring with length greater than three, but there are two palindromic substrings with length three, namely, '''aca''' and '''ada'''. In some applications it may be necessary to return ''all'' maximal-length palindromic substrings, in some, only one, and in some, only the maximum length itself. This article discusses algorithms for solving these problems. | The '''longest palindromic substring''' problem is exactly as it sounds: the problem of finding a maximal-length [[substring]] of a given string that is also a palindrome. For example, the longest palindromic substring of '''bananas''' is '''anana'''. The longest palindromic substring is not guaranteed to be unique; for example, in the string '''abracadabra''', there is no palindromic substring with length greater than three, but there are two palindromic substrings with length three, namely, '''aca''' and '''ada'''. In some applications it may be necessary to return ''all'' maximal-length palindromic substrings, in some, only one, and in some, only the maximum length itself. This article discusses algorithms for solving these problems. | ||

− | + | ==Theoretical discussion== | |

+ | ===Lower bound=== | ||

+ | The worst-case running time of any correct algorithm must be at least <math>O(N)</math>, where <math>N</math> is the length of the string. This is because the algorithm cannot be correct unless it can verify whether the entire string is a palindrome (because in that case it is itself the longest palindromic substring), and it is not possible to conclude that a string is palindromic unless every character is examined. | ||

+ | |||

+ | One might ask whether the size of the output gives a better lower bound on the worst-case running time in the case in which it is necessary to return all maximal-length palindromic substrings (rather than simply reporting the maximum length). It turns out that it does not, because there can only be up to linearly many substrings of any given length. Specifically, there cannot be more than <math>N</math> different palindromic substrings of maximal length, because there cannot be more than <math>N</math> substrings of any given length in the first place. | ||

+ | |||

+ | ===Upper bound=== | ||

+ | Given a substring of length <math>l</math>, we can determine whether it is a palindrome in <math>O(l)</math> time by iterating through it and checking whether the character at zero-based offset <math>i</math> always matches that at <math>l-i-1</math>. Furthermore, our original string, of length <math>N</math>, has <math>\Theta(N^2)</math> substrings each of length <math>O(N)</math>. Therefore, we conclude, by enumerating all substrings of our original string, checking whether each is a palindrome, and finding the longest one which is, we obtain an <math>O(N^3)</math> solution. Thus <math>O(N^3)</math> is an upper bound on the efficiency of the best algorithm, and we have established that the longest palindromic substring problem can be solved in polynomial time. | ||

==Observation== | ==Observation== |

## Revision as of 13:02, 29 April 2016

*Not to be confused with Longest palindromic subsequence.*

The **longest palindromic substring** problem is exactly as it sounds: the problem of finding a maximal-length substring of a given string that is also a palindrome. For example, the longest palindromic substring of **bananas** is **anana**. The longest palindromic substring is not guaranteed to be unique; for example, in the string **abracadabra**, there is no palindromic substring with length greater than three, but there are two palindromic substrings with length three, namely, **aca** and **ada**. In some applications it may be necessary to return *all* maximal-length palindromic substrings, in some, only one, and in some, only the maximum length itself. This article discusses algorithms for solving these problems.

## Contents

## Theoretical discussion

### Lower bound

The worst-case running time of any correct algorithm must be at least , where is the length of the string. This is because the algorithm cannot be correct unless it can verify whether the entire string is a palindrome (because in that case it is itself the longest palindromic substring), and it is not possible to conclude that a string is palindromic unless every character is examined.

One might ask whether the size of the output gives a better lower bound on the worst-case running time in the case in which it is necessary to return all maximal-length palindromic substrings (rather than simply reporting the maximum length). It turns out that it does not, because there can only be up to linearly many substrings of any given length. Specifically, there cannot be more than different palindromic substrings of maximal length, because there cannot be more than substrings of any given length in the first place.

### Upper bound

Given a substring of length , we can determine whether it is a palindrome in time by iterating through it and checking whether the character at zero-based offset always matches that at . Furthermore, our original string, of length , has substrings each of length . Therefore, we conclude, by enumerating all substrings of our original string, checking whether each is a palindrome, and finding the longest one which is, we obtain an solution. Thus is an upper bound on the efficiency of the best algorithm, and we have established that the longest palindromic substring problem can be solved in polynomial time.

## Observation

Every palindromic substring has a *centre*. For an odd-length substring, this is its middle character; for an even-length substring, this is the imaginary space between its two middle characters. Call each character and each space in the original string a *position*. Then there are positions in any string of length (to simplify things later on, we assume there is a position just before the first character and one just after the last), and any longest palindromic substring must have one of these as its centre.

Therefore, if we iterate through all positions of the string, and for each one determine the longest palindromic substring *centered on that position*, then one of these is the longest palindromic substring of the whole string. For example, in the string **opposes**, the longest palindromic substrings centered around each position are [(empty), **o**, (empty), **p**, **oppo**, **p**, (empty), **o**, (empty), **s**, (empty), **ses**, (empty), **s**, (empty)], and one of these --- **oppo** --- is the longest palindromic substring of the original string.

Being a bit clever in determining the longest palindromic substring centered about a given string improves the running time over the naive solution dramatically. We begin by noting that there definitely is a palindromic substring of length zero (the empty string) centered around the current center, if it is a space, or a palindromic substring of length one (the character itself) centered around the current center, if it is a character. Then, we repeatedly attempt to make a longer palindromic substring centered at our current location by adding the characters just before and just after the current longest palindromic substring. We can do this if and only if these characters match. If they do not match, there is no hope of any longer palindromic substring centered here existing, so we are done.

For example, suppose our current center is between the two **b'**s in the word **scabbards**. We already know there exists a palindromic substring of length zero (the empty string) centered around our current location. To determine whether we can make it longer, we check the first character on either side, that is, the two **b'**s. They match, so we know that **bb** is a palindromic substring centered at our current location. Then we try to extend it again, by checking the first character on either side. Now we find two **a'**s, so we now know we have **abba**, a palindromic substring of length 4, centered around our current location. Again we try to extend it, by checking one character on each side. We find the **c** and the **r**, which do *not* match. Therefore we know that **abba** is the longest palindromic substring centered our current location --- substrings centered at our current location that are longer than **cabbar**, such as **scabbard**, have no hope of being palindromic.

Notice that once we have fixed the centre, we will not examine any character of the string more than once in determining the longest palindromic substring centered there. That is, determining the longest palindromic substring centered at any given location takes only time, and by iterating over all possible centres, an algorithm is obtained. (Note that this algorithm also gives *all* longest palindromic substrings: if the length of the palindrome centered around a given position is maximal, then we output the longest palindromic substring centered at this position.)

## Toward a better bound

Thus, the best possible worst-case running time lies between and . We now show that the problem can be solved in time using standard data structures from the literature, the suffix tree and the suffix array.

### Suffix array

The suffix array is a sorted list of the suffixes of a given string, indexed by first character. For example, the suffix array of **bananas** is [1, 3, 5, 0, 2, 4, 6], corresponding to the suffixes [**ananas**, **anas**, **as**, **bananas**, **nanas**, **nas**, **s**]. Simple linear-time algorithms now exist for computation of suffix arrays of strings with constant or integer alphabets.^{[1]}

Once the suffix array of a string has been computed, a simple linear-time algorithm^{[2]} will compute the length of the longest common prefix of each pair of adjacent suffixes in the suffix array. The array containing these lengths is known as the *lcp array*.

If we want to know the longest common prefix of any pair of suffixes, not necessarily lexicographically adjacent, we locate those two suffixes in the suffix array and then find the minimum entry in the lcp array in the range they delimit, hence reducing the problem to a range minimum query. For example, the string **teetertotter** has suffix array [1,10,4,2,7,11,5,0,9,3,6,8] and lcp array [1,2,1,0,0,1,0,2,3,1,1], because the suffixes starting at positions 1 and 10 have one character in common at the beginning, the suffixes starting at positions 10 and 4 have two characters in common at the beginning, and so on. Suppowe we want to determine the length of the longest common prefix of the suffixes **ter** (9) and **tter** (8), which are *not* adjacent in the suffix array (it is irrelevant that they *are* adjacent in the string itself). We locate 6 and 8 in the suffix array, and we see from the lcp array that the longest common prefixes of the pairs of suffixes starting at locations 9 and 3, 3 and 6, and 6 and 8 have lengths 3, 1, and 1, respectively. This is a contiguous range of the lcp array. The minimum value in this array, 1, is the answer.

To solve the problem at hand, we will concatenate our string with a unique separator and a reversed copy of itself, so that **rearrangement** becomes, for example, **rearrangement#tnemegnarraer**, and then build the suffix array and longest common prefix array for the new string. Then we iterate through all positions in the original string and find the longest palindromic substring centered at each one. To do so, we mirror the current position across the centre of the string, and then take longest common prefixes.

#### Even case

To determine the longest palindromic substring centered between the two **r'**s (which must be of even length), we consider the suffixes starting at the underlined locations: **rear rangement#tnemegnarraer**. We see that the longest common prefix of these two suffixes has length 2 (underlined:

**rear**). But because the second half is a reversed copy of the first half, we know the

__ra__ngement#tnemegnar__ra__er**ra**in the second half is actually the

**ar**in the first half just before our current position:

**re**. Thus we have determined that the longest palindromic substring here has length 4. In general we find the character just after our current position in the original string, and the character just before it in the reversed string, and find the longest common prefix using the lcp array and RMQ.

__arra__ngement#tnemegnarraer#### Odd case

In the odd case, we are centered at some character of the original string. In this case, we examine the suffix starting at the character in the original string immediately following it, and the suffix in the reversed string starting at the character immediately preceding it. If we were centered at the **m** in **rearrangement**, then, we would be examining the suffixes starting at the underlined characters: **rearrangem ent#tnemegnarraer**. We see that the longest common prefix has length 1, and we reflect the

**e**in the reversed half back onto its position in the first half, hence,

**rearrang**is the longest palindromic substring centered at the

__eme__nt#tnemegnarraer**m**.

#### Complexity

Since positions for the centre are considered, and a range minimum query can be executed in time (or constant time with preprocessing), the time complexity of this solution is .

### Suffix tree

The suffix tree is a compressed trie of the suffixes of the string. A detailed discussion of the structure of the suffix tree is given in the article. There exist linear-time algorithms^{[3]} for construction of suffix trees, as well. There are two possible approaches here: we can either concatenate the string with a unique separator and a reversed copy of itself, as with the suffix array, or we can build a generalized suffix tree of the string and its reverse. We proceed as we did with the even and odd cases in the suffix array section, finding longest common prefixes starting at almost-corresponding positions in the original and reverse strings. It is not too hard to see that this is a lowest common ancestor query on the tree. For example, to find the longest palindromic substring of even length centered between the two **r'**s in **rearrangement**, we could build the suffix tree for **rear rangement#tnemegnarraer**, locate the leaves corresponding to the suffixes starting at the underlined characters, and find their lowest common ancestor. The depth of this node is the length of the longest common prefix of these two suffixes. Here it is 2, so we know that the substrings underlined match:

**rear**, giving the palindromic substring

__ra__ngement#tnemegnar__ra__er**re**. LCA queries can be executed in constant time after preprocessing time, giving an solution.

__arra__ngement#tnemegnarraer### Existence of a linear-time algorithm

It is possible to execute LCA queries on a tree with nodes in time using a technique due to Gabow and Tarjan.^{[4]} This shows that a linear-time solution exists, which puts to rest the question of the best possible efficiency for a solution to the longest palindromic substring problem.

## A simple asymptotically optimal solution

Although we have already established that the solution using suffix trees and LCA queries is asymptotically optimal, we are driven to seek a better solution for many reasons. The suffix tree based solution:

- requires much code to implement
- has a high constant factor on runtime
- consumes a great deal of memory, and
- is still with general alphabets.

However, there exists a simpler, shorter, faster, less memory-hungry algorithm^{[5]} which accesses the string only by comparing its characters for equality (and hence has running time independent of alphabet size). This is known as *Manacher's algorithm*.^{[6]}^{[7]} Again we will compute the longest palindromic substring centered around each possible position (so that returning all longest palindromic substrings is as easy as simply finding the maximum possible length for a palindromic substring). Our algorithm will return a *longest palindrome array*: an array in which the ^{th} element contains the length of the longest palindrome centered around the ^{th} position from the left. (Note that the parities of elements in the longest palindrome array alternate.)

The algorithm processes the string from left to right, and fills in the longest palindrome array in the same order, so that when any given position is being considered, the longest palindromes centered around all positions to the left are already known. The algorithm distinguishes two kinds of positions: "interesting" positions and "uninteresting" positions. The algorithm "hops" from each interesting position to the one immediately to the right. It spends amortized constant time on each interesting position. Interesting positions are so named because any maximal-length palindromic substring overall must be centered at one of them. Uninteresting positions' entries in the longest palindrome array can be computed in constant time "in passing" from one interesting position to the next.

We will proceed through a series of observations to derive the algorithm. First, the designation of interesting and uninteresting positions is not unique; in particular, any uninteresting position can be relabelled interesting without affecting correctness or consistency. That being said, we begin by denoting the first position --- the one immediately to the left of the first character --- interesting, and going from there.

*Lemma* (Second observation): If is the longest palindrome centered at the current position, and is the longest palindromic proper suffix of , then all positions between the current position and the centre of may safely be denoted uninteresting.

*Proof*: Consider some position between the centres of and . Suppose there exists a palindromic substring, , of length greater than or equal to that of , centered at . Certainly the last character of lies to the right of the last character of , since is centered further to the right and is longer. So we repeatedly remove one character from each end of until and end at the same position. Since is now shorter than (since its centre is to the right but both and extend equally far on the right), it is a palindromic proper suffix of . Since the centre of is to the left of the centre of , is longer than , a contradiction as is maximal by hypothesis.

To find the longest palindromic proper suffix, we make yet another observation: the longest palindromic proper suffix and the longest palindromic proper prefix are reflections of each other about the current centre. So we scan backward from the current position. For each position to the left of the current position, we know the longest palindromic substring centered there. If the first character of is to the right of the first character of , then the longest palindromic substring centered at the position obtained by reflecting about the current position is identical to . (If it were possible to extend it, it would also be possible to extend .) This means we can fill in the corresponding position in the longest palindromic array immediately, and also that there is no palindromic prefix of centered at as , and hence no corresponding palindromic suffix at the position obtained by reflecting across the current centre. Otherwise, on the other hand, we know there *is* a palindromic (proper) prefix centered at , which means there is a palindromic (proper) suffix centered at the position obtained by reflecting across the current centre. Furthermore, since we are scanning backward from the current centre, the *first* such we encounter is the centre of the *longest* palindromic proper prefix, so we have also found the *longest* palindromic proper suffix.

These facts give us enough information to construct an algorithm:

- (Initialization) Fill in the first entry of the longest palindrome array; it is zero, for this corresponds to the position just before the beginning of the string. Start at the position right on the first character of the string. This is the first interesting position. Also, we need to keep track of the length of the currently longest known palindrome centered at the current position. This starts out as one (the character itself).
- (Test interesting position) Check whether the palindrome we have so far centered at the current position can be extended (that is, whether there exist identical characters immediately to the left and right of it). If so, extend it. Do this repeatedly until it cannot be extended anymore, either because it is a prefix/suffix of the entire string, or because the next characters on the left and right do not match.
- We now know the length of the longest palindrome centered at the current location. Fill this in.
- (Find next interesting position) Let scan backward through the longest palindrome array and scan forward, so that and are reflections across the current position. Note that the entry for is always known beforehand.
- If is after the last position in the string, we have computed all entries in the longest palindrome array, and the algorithm halts. (This always happens eventually.)
- Otherwise, if the longest palindrome centered at has its first character to the right of the first character of the longest palindrome centered at our current position, then its length is also the length of the longest palindrome centered at . Fill this in.
- Otherwise, the longest palindrome centered at is
*at least as long*as the longest palindrome centered at . is the next interesting position. Go back to step 2, setting the current position to and the length of the currently longest known palindrome centered there to .

It should now be clear that this algorithm is correct, but it is not necessarily clear that it is efficient.

**Theorem**: Manacher's algorithm runs in linear time.

**Proof**:

- The outer loop runs times.
- Step 1 takes constant time and is executed once.
- Step 2 contains a loop. Each iteration of the loop takes constant time and examines two characters of the string, one on the left of the current palindrome and one on the right. Call the pointer to the next character on the right to examine . After each iteration of the inner loop, either it runs again immediately, moving one character to the right or step 3 and step 4 follow, which either terminate the algorithm or move the current position to the right, keeping fixed. (This is because we always move to a suffix in step 4.) So after each iteration either or the current position is advanced, and thus total number of iterations of the loop in step 2 is no more than the sum of , the number of characters, and , the number of positions. So the total time spent in step 2 is .
- Step 3 takes constant time and is executed once per iteration of the outer loop.
- Step 4 consists of some constant-time parts executed once per iteration of the outer loop, as well as an inner loop. The inner loop takes constant time per iteration can only run times in total, because each iteration fills in a previously unknown entry in the longest palindrome array, which has entries.

Overall, each step contributes to the running time, and so Manacher's algorithm is overall.

## References

- ↑ Juha Kärkkäinen and Peter Sanders. 2003. Simple linear work suffix array construction. In
*Proceedings of the 30th international conference on Automata, languages and programming*(ICALP'03), Jos C. M. Baeten, Jan Karel Lenstra, Joachim Parrow, and Gerhard J. Woeginger (Eds.). Springer-Verlag, Berlin, Heidelberg, 943-955. Retrieved 2010-11-13 from http://monod.uwaterloo.ca/~cs482/suffix-icalp03.pdf. - ↑ Toru Kasai, Gunho Lee, Hiroki Arimura, Setsuo Arikawa, and Kunsoo Park. 2001. Linear-Time Longest-Common-Prefix Computation in Suffix Arrays and Its Applications. In
*Proceedings of the 12th Annual Symposium on Combinatorial Pattern Matching*(CPM '01), Amihood Amir and Gad M. Landau (Eds.). Springer-Verlag, London, UK, 181-192. - ↑ E. Ukkonen. (1995). On-line construction of suffix trees.
*Algorithmica***14**(3):249-260. PDF | PDF with figures - ↑ Gabow, H. N.; Tarjan, R. E. (1983), "A linear-time algorithm for a special case of disjoint set union",
*Proceedings of the 15th ACM Symposium on Theory of Computing (STOC)*, pp. 246–251, doi:10.1145/800061.808753 - ↑ Frederick Akalin. Finding the longest palindromic substring in linear time. Retrieved 2010-11-13 from http://www.akalin.cx/2007/11/28/finding-the-longest-palindromic-substring-in-linear-time/.
*(This source contains a Python implementation of the simple linear-time algorithm.)* - ↑ Glenn Manacher. 1975. A New Linear-Time "On-Line" Algorithm for Finding the Smallest Initial Palindrome of a String. J. ACM 22, 3 (July 1975), 346-351. DOI=10.1145/321892.321896 http://doi.acm.org/10.1145/321892.321896
- ↑ Alberto Apostolico, Dany Breslauer, and Zvi Galil (1994), "Parallel Detection of all Palindromes in a String", Comput. Sci.

## Code

C++ implementation of Manacher's algorithm

## External links

- SPOJ problems:
- The problem Calf Flac from the USACO training pages can be solved using the naive algorithm.